PRONAR PRONAR N262, Руководство оператора

Страница: 127 / 145

SECTION 5 Pronar N262 N262/1
5.33
For cleaning and maintenance of plastic coated surfaces it is recommended to
use clean water or special preparations designed for this purpose.
Do not apply organic solvents, preparations of unknown origin or other
substances, which may cause damage to lacquered, rubber or plastic
surfaces. In the event of doubt it is recommended to make a test on an
unseen surface area.
Surfaces smeared with oil or grease should be cleaned by application of
benzene or other degreasing agents and then washed with clean water with
added detergent. Comply with recommendations of the Manufacturer.
DANGER
Carefully read the instructions for application of washing detergents and maintenance
preparations.
While washing with detergents wear appropriate protective clothing and goggles
protecting against splashing.
During service with the tailgate raised, protect it from falling down by closing the cut-off
valve and with a suitable mechanical support which is durable and stably mounted.
Switch tractor engine off and disengage PTO shaft before cleaning the machine and
standing on the chain conveyor strips.
Washing detergent should be kept in original containers, optionally in
replacement containers, but very clearly marked. Preparations may not be
stored in food and drink containers.
Unsure cleanliness of elastic conduits and seals. The plastic from which these
elements are made may be susceptible to organic substances and some
detergents. As a result of long-term reaction of some substances, the ageing
process may be accelerated and risk of damage increased. Rubber elements
should be maintained with the aid of special preparations after previous
thorough washing.
Observe environmental protection principles and wash manure spreader in a
place designed for this purpose.
Washing and drying manure spreader must take place at temperatures above
0°C.