SECTION 2
Pronar N262 N262/1
2.3
•
Before each use of the manure spreader check its technical condition. In particular,
check the technical condition of the hitch system, the axle system, brake systems and
indicator lights and tension of feeding chain.
•
The machine can only be stood on when it is absolutely motionless and the tractor
engine is switched off.
•
Staying in the material spreading area is forbidden due to danger which may be
caused by stones, pieces of wood etc. contained in the material.
•
Take particular care while spreading material near roads and other vehicles.
•
Take particular care while spreading material near people and animals.
•
Do not carry people or animals on the manure spreader.
2.1.2 HITCHING AND DISCONNECTING FROM TRACTOR
•
Prior to attaching the manure spreader to tractor, check the technical condition of the
manure spreader's and tractor's hitch system, drive shaft and connection elements of
the hydraulic, electrical and pneumatic systems.
•
The spreader and tractor must not be attached if the hydraulic oil in the two machines
is of different types.
•
When connecting the hydraulic lines to the tractor, make sure that the hydraulic
system of the tractor and manure spreader is not under pressure.
•
The manure spreader may only be used when all the safety guards and other
protective elements are technically sound and correctly positioned.
•
While connecting the spreader to the tractor, use the appropriate tractor hitch.
•
Be especially careful when hitching the machine to the tractor or truck tractor.
•
When hitching, there must be nobody between the manure spreader and the tractor.
•
Regularly check the condition of connections and safety devices.
•
The manure spreader disconnected from the tractor must be immobilised with the
parking brake.
•
If the machine is positioned on a slope or elevation it should be additionally secured
against moving by placing chocks under the machine's wheels.
Содержание PRONAR N262
