manualshive.com logo in svg

ProMinent DulcoFlow DFMa series, Руководство по эксплуатации, Страница: 9 / 57

Поделиться
Скачать
ProMinent DulcoFlow DFMa series Скачать руководство пользователя страница 9

3 

Safety chapter

Explanation of the safety information
The following signal words are used in these

operating instructions to identify different

severities of a hazard:

Signal

word

Meaning

WARNI

NG

Denotes a possibly hazardous sit‐

uation. If this is disregarded, you

are in a life-threatening situation

and this can result in serious inju‐

ries.

CAU‐

TION

Denotes a possibly hazardous sit‐

uation. If this is disregarded, it

could result in slight or minor inju‐

ries or material damage.

Warning signs denoting different types of

danger
The following warning signs are used in these

operating instructions to denote different types

of danger:

Warning signs

Type of danger

Warning – high-

voltage.

Warning – danger

zone.

Correct and proper use

n

The device may only be used with liquid

metering chemicals.

n

The device can only be used with pulsing

liquid flows with a clear zero flow.

n

The device may only be used after it has

been correctly installed and commissioned

in accordance with the technical data and

specifications contained in the operating

instructions.

n

Observe the general limitations with regard

to viscosity limits, chemical resistance and

density - see also ProMinent resistance list

(In the product equipment catalogue or at

www.prominent.com

)!

n

Any other uses or modifications are pro‐

hibited.

n

The device is not suitable for measuring

continuous liquid flows.

n

The device may not be used to measure

gaseous media or solids.

n

The device may not be used with combus‐

tible media without appropriate protective

measures.

n

The device may not be used with explo‐

sive media.

n

The device may not be used with radioac‐

tive media.

n

The device is not intended for exterior

applications without use of suitable protec‐

tive equipment.

n

The device should only be operated by

trained and authorised personnel, see the

following "Qualifications" table.

n

You are obliged to observe the information

contained in the operating instructions at

the different phases of the system's

service life.

Safety chapter

 

 

 

9

Содержание DulcoFlow DFMa series


























































Отзывы:

Нет отзывов