October 2014
Page
17
2.3
Logic Analyzer
2.3.1
LA input connection
Insert the plug of a Logic Analyser module into the LA signal input on front panel
and fix two screw. Then 16 channel clamp of LA connect to target signal and
ready for measurement.
2.3.2
User interface introduction
Figure 13
. User interface of logic analyzer.
Channel and Bus indicate
: display current working channel and bus.
Channel binary value display
: display binary system value for the
channel position in current cursor.
Battery powers indicate
: indicate battery power when battery inside.
Decimal system value indicate the position of current cursor in storage
area.
Yellow dashed line indicates current cursor.
Blue dashed line indicates current trigger position.
Percentage value indicate current trigger position in storage area.
