Promax OL-612 Скачать руководство пользователя страница 14

Страница: 14 / 128

October 2014

Page

The icon indicates the coupling mode of the CH1 channel:

The icon "–" indicates the direct current coupling.

The icon "

∼

" indicates the AC coupling.

The icon "

" indicates GND coupling.

The reading indicates the vertical scale factor (the Voltage Division) of the

CH1 channel.

The information shows the zero point positions of CH1 or CH2 channel.

The yellow pointer shows the grounding datum point (zero point position)

of the waveform of the CH2 channel. If the pointer is not displayed, it

shows that this channel is not opened.

The red pointer indicates the grounding datum point (zero point position)

of the waveform of the CH1 channel. If the pointer is not displayed, it

shows that the channel is not opened.

The positions of two purple dotted line cursors measurements.

2.2.2

How to Implement the General Inspection

After you get a new oscilloscope, it is recommended that you should make a

check on the instrument according to the following steps:

►

Check whether there is any damage caused by transportation.

If it is found that the packaging carton or the foamed plastic protection

cushion has suffered serious damage, do not throw it away first till the

complete device and its accessories succeed in the electrical and mechanical

property tests.

►

Check the Accessories

The supplied accessories have been already described in the "Appendix A:

Enclosure" of this Manual. You can check whether there is any loss of

accessories with reference to this description. If it is found that there is any

accessory lost or damaged, please get in touch with the distributor of

PROMAX responsible for this service or the PROMAX local offices.

►

Check the Complete Instrument

If it is found that there is damage to the appearance of the instrument, or

the instrument can not work normally, or fails in the performance test,

please get in touch with the PROMAX distributor responsible for this

business or the PROMAX local offices. If there is damage to the instrument

caused by the transportation, please keep the package. With the

transportation department or the PROMAX distributor responsible for this

business informed about it, a repairing or replacement of the instrument will

be arranged by the PROMAX.

Содержание OL-612

































































































































Результаты поиска

Содержание OL-612

Отзывы:

Бренды по названию

Популярные бренды

Promax OL-612, Руководство пользователя

Результаты поиска

Содержание OL-612

Отзывы:

Бренды по названию

Популярные бренды