Operating Instructions
TM-150-D-A-XL
Operation
39 / 47
V1
GB
5.6
Damages of suction plate
Avoidance of damages:
To avoid damages of the rubber seal on the suction plate (chinks, abrasion) take notice, that:
during the operation (lifting, transporting and lowering) with the device, the suction plate does not brush or pump
against other products or materials.
Otherwise the rubber seal on the suction plate could be damaged (danger of pressure loss).
Product could fall down.
Danger of accidents!
5.7
End of work
It is recommended to fill the diesel tank completely in the evening. Otherwise it will possibly the next day to
have start-up problems (strong smoke emitting). When condensation due to possible temperature variations
(at night) is formed in the Diesel tank.
After each end of work, the main switch of the battery must be switched off!:
a) so that the engine cannot be started by unauthorized persons (anti-theft device),
b) to separate the device from the power circuit.
1.) Open cover cap. (Ill. 1).
9.) Switch off the main switch of the battery (on horizontal
position ( Ill.2)). Afterwards close the cover cap again (Ill. 2).
Ill. 1
Ill. 2
