O
O
P
P
E
E
R
R
A
A
T
T
I
I
O
O
N
N
A
A
N
N
D
D
M
M
A
A
I
I
N
N
T
T
E
E
N
N
A
A
N
N
C
C
E
E
M
M
A
A
N
N
U
U
A
A
L
L
TP2000
22
MUTP2000171893021216
4.2.2 P
RECAUTIONS FOR USE
This forklift is not provided with a light unit, therefore it is forbidden to use it
when visibility is scarce.
Before starting the engine, make sure that all the distributor levers are in neutral
position.
Do not allow anyone in the area where the machine works and moves.
Operate the FORKLIFT TP2000 ONLY FROM THE CONTROL POSITION.
The FORKLIFT Hinowa TP2000 has been designed for handling palletized goods or
boxes. The handled material must not weigh more than 2000Kg with a maximum
distance of 500 mm between the centre of gravity of the load and the horizontal and
vertical plane of the forks. The loads handled must be firm and compact, correctly
positioned on standard pallets measuring 1000x1200mm or 800x1200mm, the maxi‐
mum height of the load to be transported cannot exceed 1800mm (make sure that
the centre of gravity of the load to be transported is at a maximum distance of
500mm from the horizontal and vertical plane of the forks).
The operator must always look in the direction of travel, in such a way as to check
the route and avoid accidents. If transporting goods that hinder visibility, proceed
in reverse; if this is not possible a second operator must walk before the forklift,
keeping a safety distance, and the driver must proceed very slowly and stop the
machine if he/she cannot see his/her colleague.
Make sure that the ground is firm enough to support the machine.
Take care to prevent the machine from overturning when you work on frozen
ground. Increases in temperature soften the ground, making it unstable.
Before use, check that the carriage sliding and supporting area on the machine is
free of debris or other material that may hinder its movement.
ATTENZIONE
ATTENZIONE
WARNING
WARNING
PERICOLO
DANGER
