Operating instructions SPEEDY 4all & 4you & 4teen
26
The size of the clothing guard can be read-off
the notches on the bottom edge of the clothing
guard. One notch means size 1, two notches
mean size 2 and three notches mean size 3.
Figure 62: Size marking on the clothing guard
After changing to a wider tyre size or after
changing the wheel camber, it may be
necessary to change to another clothing guard
size. Where required, such a change may be
arranged by your dealer.
21 Drive wheels
We recommend: The spoke guard
prevents hands and fingers entering and being
trapped in the wheels when riding. The risk of
injury is thus minimised.
Figure 63: Spoke guard for minimising the risk of
hands and fingers getting trapped
21.1 Removing and attaching the drive
wheels
Figure 64: Locking knob of the quick-release axle in
the middle of the wheel axle
To
remove the drive wheels
grip through the
spokes around the wheel hub with your fingers.
By pressing the locking knob in the middle of
the wheel axle with your thumb, the wheels
can then be removed.
When
attaching the drive wheels
, the locking
knobs must be pressed and the drive wheels
with quick-release axle must be inserted in the
drive wheel bearings. Special attention should
be paid here to ensure that the knob springs
out again after attaching the wheel as
otherwise it is not secured. You will know that if
you can see the index groove.
Figure 65: Quick release axle with index groove
Before using the product, check if the
wheels are secured and that the quick release
axles are locked.
Locking knob of the
quick-release axle
Index groove
Size marking for size 2
