PRO ACTIV 4you EVOSPEEDY 4teen Скачать руководство пользователя | Manualshive

Страница: 6 / 76

background image

Operating instructions SPEEDY 4all & 4you & 4teen

5

1 Preface

Dear Customer,

Congratulations on purchasing your new
PRO ACTIV product. You have bought a
quality product which has been especially
customised to meet your requirements. We
have put together some instructions about its
proper and safe use in the following document.
Please read these instructions before using the
product.

These operating instructions refer to standard
components. If you have individual solutions or
non-standard components on your product,
your dealer or we at PRO ACTIV would be
happy to deal with any questions you may
have about handling it.

The difference between the products Speedy
4all & 4you, Speedy 4all EVO & 4you EVO and
Speedy 4teen are in the possibility of the
individual design of the frame geometry and
the selection of options. If there is a difference
in the selection of options, this is mentioned in
the respective chapter. Otherwise the
operating instructions are identical.

If you have any further questions about this or
any of our other products, we would be glad to
be at your disposal.

Enjoy your trips and the best possible mobility.

Your PRO ACTIV team

2 Legend

The symbols used in these operating
instructions have the following meanings:

Manufacturer

Warnings, tips and safety instructions

Serial number

Additional information

Assembly instructions for the dealer (see

table of contents)

3

CE Declaration of Conformity /
other information

3.1 Classification

The SPEEDY 4all & 4you, Speedy 4all EVO &
4you EVO and Speedy 4teen

rigid frame

wheelchair (referred to as a "product" below) is
classified as a class I product.

3.2

Declaration of Conformity

PRO ACTIV Reha-Technik GmbH declares in
the context of an individual declaration of
conformity that the respective product has
been developed and manufactured according
to the relevant provisions of
EC Directive 93/42/EEC 2007.

If the product is adapted in a manner which
has not been agreed by PRO ACTIV Reha-
Technik GmbH, this declaration becomes void.

3.3 Manufacturer

PRO ACTIV Reha-Technik GmbH

Im Hofstätt 11
D-72359 Dotternhausen
Tel. +49 7427 9480-0
Fax +49 7427 9480-7025
E-Mail: [email protected]
Web: www.proactiv-gmbh.com

4

Scope of delivery

The delivery includes the product configured in
accordance with the order, with operating
instructions including record of training / hand-
over certificate and inspection lists. You can
view the basic equipment in chapter "Technical
specifications". As per your order, the product
is equipped with additional recommended
accessories, such as push handles, anti-
tippers and waist belt.

Please check that the delivery is complete after
you have received your product.

The product is tested to ensure it is completely
functional prior to shipping. If your product has
been damaged during transit, please contact
your dealer or PRO ACTIV immediately.

«
...
4
5
6
7
8
...
»

Содержание 4you EVOSPEEDY 4teen













































































Отзывы:

Нет отзывов

Похожие инструкции для 4you EVOSPEEDY 4teen

Quickie Revolution

Бренд: Quickie Страницы: 47

Everest Jennings PURETILT PT3000-18

Бренд: Graham Field Страницы: 32

Street Warrior Q1-10

Бренд: Vitea Care Страницы: 68

Бренд: RHealthCare Страницы: 22

Бренд: RGK Страницы: 37

Бренд: Drive Страницы: 36

Бренд: R82 Страницы: 23

Бренд: E&J Страницы: 2

Бренд: Karma Страницы: 68

Бренд: Quantum Страницы: 44

Бренд: Quickie Страницы: 2

Бренд: Harbor Freight Tools Страницы: 8

Gendron 4000MRQ2

Бренд: Graham Field Страницы: 24

Бренд: progeo Страницы: 31

Бренд: Orliman Страницы: 24

Бренд: Fumagalli Страницы: 64

Бренд: EliteCare Страницы: 11

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды