Operating instructions SPEEDY 4all & 4you & 4teen
24
Observe: In case you are sitting in the
product when removing the clothing guard, you
have to relieve the backrest before pulling the
cord.
Now, first the clothing guard can be removed
from the side panel guide for the mounting bar
(then the cord can be released again) and
pulled from behind the back joint shaft.
Figure 53: Clothing guard pulled from the side panel
guide to the front
For
mounting
the clothing guard, first this is
connected to the rear of the back joint shaft
with the mounting bar, then the mounting bar is
inserted at the front in the side panel guide and
pressed downwards until the locking pins
engage in the mounting bar.
Figure 54: Mounting bar attached to the back joint
shaft
Removal and attachment of the clothing guard
on EVO models
SPEEDY 4all EVO
and
SPEEDY 4you EVO
:
For
removing
the clothing guard, first this is
"bolted side section mount" at the front and
then pulled from the back joint shaft from
behind.
Figure 55: Clothing guard pulled out of the "bolted
side section mount" to the front
For
attaching
the clothing guard, first this is
attached to the back joint shaft with the rear
side section mount and then the front side
section mount is inserted in the "bolted side
section mount".
Figure 56: Rear side section mount attached to the
back joint shaft
