Operating instructions SPEEDY 4all & 4you & 4teen
25
20.3 Adjusting the clothing guard
position
After adjusting the drive wheel position, an
adaptation of the clothing guard position to the
wheel arch is also necessary.
For adapting the clothing guard position, on
each of the clothing protection guards, loosen
the two or four M5 fixing screws (AF 3 mm)
from the clothing guard mount.
Figure 57: Clothing guard mount
Figure 58: M5 fixing screws and slots of the
mounting bar (SPEEDY 4all, -4you and -4teen)
Figure 59: M5 fixing screws and slots of the
mounting bar (SPEEDY 4all EVO and -4you EVO)
Now the mounting bar (with SPEEDY 4all, -
4you and -4teen) or the front and rear side
section mounts (with SPEEDY 4all EVO and -
4you EVO) can be moved into the desired
position along the slots of the clothing guard
and the mounting bar or the side section
mount. Then the clothing guard mounts are
positioned accordingly and the M5 fixing
screws are screwed back into the clothing
guard mount with 4 Nm.
Figure 60: Slots of the clothing guard
20.4 Clothing guard size
The clothing guard is available in three
different sizes. The dimensions of the wheel
arches differentiate with the different sizes:
Aluminium:
30 mm (Size 1), 36 mm
(Size 2), 46 mm (Size 3)
Carbon:
30 mm (Size 1), 36 mm (Size 2),
42 mm (Size 3)
Figure 61: Dimensions of the wheel arches
Slots of the clothing guard
M5 fixing screws
M5 fixing screws
Clothing
guard mount
Slots of the
side section mount
Slots of the
mounting bar
Dimensions of the wheel arches