Operating instructions SPEEDY 4all & 4you & 4teen
56
For belt systems (hip, diagonal shoulder
belt, retractors), the instructions for use of the
respective manufacturer must be observed.
When transporting, the brakes of the
product must be applied.
Loose parts of the wheelchair
(Therapeutic table, crutches, etc.) must be
removed before travelling.
Wheelchairs and restraint systems that
have been exposed to an impact must be
replaced. They are no longer allowed to be
used as a seat in motor vehicles.
28 Storage
When being stored, the product should be kept
in a dry environment and covered up where
possible.
To avoid corrosion and therefore malfunctions
or breakages of components, the product may
not be exposed to any aggressive
environmental influences (salt in particular).
29 Transport
When loading or transporting, the product can
be held on the frame and on the back cross
bar.
The transportation of persons in a
wheelchair or other persons in the product in
motor vehicles when using the specified
equipment is only permitted when observing
chapter 27. In this case, observe the versions
in chapter 27.
To reduce the weight, individual
components, such as the caster wheel forks
with caster wheels and the drive wheels can be
removed for loading and stored separately.
The product and all associated components
must be secured during transport so that they
are not damaged (e.g. by falling over) and do
not become a hazard to persons or other
products.
If the product user needs to be
transported over an obstacle, such as a step,
and there are suitable facilities such as a ramp
or a lift available, then these should be used. If
such facilities are not available, then the
obstacle is to be overcome by being carried by
two helpers. When carrying the product, it may
not
be lifted by the side sections, the drive
wheels or the footrests. We recommend
holding the product on the frame and back
cross bar.
30 Malfunctions
In the event of any malfunctions which cannot
be solved by yourself based on the operating
instructions included in the scope of delivery,
please contact your specialist retailer or
PRO ACTIV directly.
Malfunctions must be solved before any
further use or, if they occur during the journey,
this must be interrupted immediately.
31 Cleaning and care
Regular cleaning of the product is prescribed
to prevent the components becoming clogged
up due to dirt. In particular, the product should
be carefully cleaned after every major use, e.g.
summer or winter holidays.
To avoid corrosion and therefore malfunctions
or breakages of components, the product may
not be exposed to any aggressive
environmental influences. If this cannot be
avoided, the product should be cleaned
immediately after such use and moving parts
need to be greased. Regular cleaning prevents
corrosion and increased wear.
In case the product becomes wet when using,
dry it after use.
