Operating instructions SPEEDY 4all & 4you & 4teen
38
Once the position has been set, fix the support
tubes by tightening the M6 fixing screws (AF
4 mm) with washers to 7 Nm on both sides.
23.5 Divided footrest
Figure 103: Divided footrest, standard position
To
fold up
one of the two footrest parts, grasp
it and fold it up to the side. Moreover, you can
also turn or pivot the footrest outwards.
Figure 104: One footrest folded up, option for
pivoting outwards marked
For the
longitudinal setting of the footrest
support tubes or adaptation to the lower leg
length
, the M6 fixing screws (AF 10 mm) must
be undone on both sides. The support tubes
are then pushed along their slots and thus, in
the correct position. Take care that the support
tubes have the same length on both sides after
the setting.
Figure 105: M6 fixing screw with washer for
adjusting the lower leg length
Once the position has been set, fix the support
tubes by tightening the M6 fixing screws
(AF 10 mm) with washers to 7 Nm on both
sides.
23.6 Swing away footrest
Figure 106: Swing away footrest, standard position
To
fold up
one of the two footrest parts, grasp
it and fold it up to the side. Moreover, you can
also turn or pivot the footrest outwards.
Fold up
Pivot outwards
M6 fixing
screws with
washer
Slots in the
support
tube