Operating instructions SPEEDY 4all & 4you & 4teen
57
Clean the quick release axles of the drive
and caster wheels as well as the ball bearings
and grease these with a little lubricating oil with
high corrosion protection properties (e.g.,
Neoval MTO 300) approx. every 8 weeks in
order to guarantee the reliable functioning
properties.
Clean your product with water, solvent or
neutral cleaning agents. Do not use any
abrasive cleaning agents or aggressive, acidic
cleaners, to prevent scratching or fading of the
coating or the anodised parts. Use only water
and soap to clean the seat and back padding.
The product must not be cleaned using
steam or high pressure.
If you need care products for your product,
please contact PRO ACTIV.
32 Maintenance
32.1 General instructions
The product is not a maintenance-free device.
Therefore, please observe the following
instructions about maintenance.
If repairs are required or there are any
defects in your product, in the interests of your
own safety, you should contact your specialist
retailer or PRO ACTIV before using it again
and have the defect remedied. Screws and
other elements need to be secured properly
again after repairs.
For tyres with tread: As soon as there is
one or more points with less than 1 mm of
tread on the tyres, the tyres must be changed
as otherwise there is an increased risk of an
accident.
For tyres without thread: As soon as there
is one or more points where the tyre carcass or
the puncture-proofing is visible, the tyres must
be changed as otherwise there is an increased
risk of an accident.
Only manufacturer's original parts may be
used when ordering spare parts.
Repairs and conversions to the product
may only be carried out by your dealer or
PRO ACTIV.
Tightening torques and securing details for
fastening elements as shown in the table in
chapter 37 must be observed.
32.2 Service schedules
There is some
maintenance work or checks
which should be carried out by the user
themselves
at regular intervals (approximately
every 4 weeks depending on the frequency of
use):
Check the tyres for damage, foreign bodies
and any cracks that form.
Check the tyre pressure and correct if
needed (the tyre pressure should always
be as printed on the tyre covers).
Check the brakes (function, wear on pivot
bolts).
Clean and oil the pivot points of the brakes
and check the ease of movement or
actuation force of the brake lever.
Check the function of the anti-tipping
device.
Check the stable stand of the seat and
back padding.
Check the tight fit of the fixing screws on
the seat and back system.
Check the function and ease of running of
the quick release axles of the drive wheels
and caster forks.
If you should discover any problems
during these checks, please immediately
contact your dealer or PRO ACTIV. Service
and repair work on the product may only be
carried out by your dealer or PRO ACTIV.
In addition to these maintenance tasks /
checks by the user, PRO ACTIV has
prescribed
maintenance tasks to be carried
out by the dealer or PRO ACTIV
for safe