Operating instructions SPEEDY 4all & 4you & 4teen
35
Figure 90: M6 fixing screw with washer and slots in
the support tube for adjusting the lower leg length
Once the position has been set, fix the support
tubes by tightening the M6 fixing screws
(AF 4 mm) with washers to 7 Nm on both
sides.
With a product frame that has a v shape,
due to the resulting tensioning of the footrest
support tubes in the footrest support plate from
the longitudinal setting, it is necessary to open
the M6 fastening clamp screws (AF 5 mm)
again on the footrest support tubes. View the
procedure in chapter 23.1.
23.3 Footrest folding up to one side
Figure 91: Footrest folding up to one side, standard
position
For
footrest folding up to one side
, lift the
footplate up in the direction of travel on the left
side.
Figure 92: For folding up to one side, lift the
footplate up in the direction of travel on the left side
(product view from the front)
Figure 93: Footrest raised from the bracket (product
view from the front)
Figure 94: Footrest folded up on one side (product
view from the front)
M6 fixing screws
with washer
Slots in the
support tube
Fold-up on
one side
Footrest
Bracket with cylinder pin
