19
Installing a new additive refill
Only remove the ValveCare refill when it is completely empty (to
avoid spillage and incorrect additive consumption trouble codes).
Remove the cap from the new refill and place the bottle upside
down with the foil side centred against the protruding pin
(bottle-opener). See illustration.
Push the pin through the foil and push the bottle smoothly down
to the screw thread. Then screw the bottle onto the screw
thread (3 complete rotations).
Never move the bottle back
upwards to avoid of leaks/spillage.
Attention: always work with clean parts. Dirt/contamination may
damage the ValveCare dosing pump.
Prins recommends to check the consumption of additive regularly (fluid consumption: 1 bottle per
1280 liters LPG/CNG).
WARRANTY CONDITIONS
Extract from the General Conditions of Prins Autogassystemen B.V.. These General Conditions were
deposited with the Eindhoven Chamber of Commerce and Industry on 3 January 2011 under No.
17058344. The complete text of the General Conditions is available on the Prins website.
Warranty
14.1
Prins warrants that the Products it supplies are manufactured from sound materials and are
of sound workmanship. Should defects nonetheless occur in the Products supplied by Prins as
a result of manufacturing defects and/or defects in the material, Prins will, after examining
the defects in accordance with Article 14.3, repair the said defects, or cause them to be
repaired, within the specified term, or provide the components required for repair, or cause
them to be provided, replace the Products in full or in part, or reimburse at most the invoice
value of the Products, all this at its sole discretion. This warranty shall apply during twenty
four (24) months following delivery.
14.2
Should the Product supplied comprise a complete LPG system, this must have been built in by
Prins or by a dealer approved by Prins in accordance with the standard instructions and the
statutory requirements; if the system will be registered online (warranty portal) within thirty
(30) days of delivery, the warranty period referred to in Article 14.1 shall be twenty four (24)
months, subject to written deviations. If no online registration (warranty portal) will be
examined, the guaranty term of twenty four twenty four (24) months will start on the delivery
date.
14.3
At the request of Prins, the Purchaser shall allow an expert appointed by Prins to examine the
defective Product, failing which the right to warranty shall lapse. The decision of the expert
shall be binding for both parties. The costs of such expert appraisal shall be borne by Prins if
the Purchaser has made a claim under the warranty; they shall otherwise be at the expense of
the Purchaser.
14.4
Any claims under this warranty shall be reported to Prins by registered letter within eight (8)
days of their occurring. Should the complaint not be submitted within that period, any claim
vis-à-vis Prins shall lapse. Any legal proceedings instituted in respect thereof shall be brought
before the court within thirteen (13) months of the submission of the timely complaint on
pain of their lapsing.
14.5
Should the Purchaser request Prins to repair the Products at the Purchaser’s premises, Prins
shall be authorised to invoice the Purchaser for the costs incurred, including travel expenses,
