18
User Manual
neuro 102 Plus
Settings
(Default Value)
Parameter Description
PROFILE ABORT COMMAND
ON PAGE-1
Supervisory control over availability of Profile Abort command on
Page-1. ‘Enable’ for availability.
(Default : Disable)
Disable
Enable
BAUD RATE
Communication speed in ‘Bits per Second’. Set the value to match
with the host baud rate.
COMMUNICATION PARITY
One of the communication error trapping features. Select the data
packet parity as implemented by the host protocol.
CONTROLLER ID NUMBER
Unique numeric code assigned to the controller for identification
by the host. Set the value as required by the host.
COMMUNICATION WRITE ENABLE
Setting to ‘No’ disallows the host to set or modify any parameter
value. The host, however, can read the values.
1 to 127
(Default : 1)
(Default : No)
No
Yes
(Default : Even)
None
Even
Odd
(Default : 9.6)
4800
9600
19200
38400
57600
2400
The Following Serial Communication Parameters are not available if the Controller is ordered with
Auxiliary Setpoint Option.