23
OP1, OP2 & OP3 FUNCTION PARAMETERS : PAGE-15
User Manual
neuro 102 Plus
Table 9.1
Settings
(Default Value)
Parameter Description
OUTPUT-2 FUNCTION SELECTION
(Applicable for Output-2 hardware module, if fitted)
Select the function / feature that will utilize Output-2 module as
output.
ALARM-1 LOGIC
(Available if Output-2 function is Alarm-1 Output)
Select ‘Normal’ if Alarm-1 is to activate an Audio / Visual alarm.
Select ‘Reverse’ if Alarm-1 is to Trip the system.
(Available if Output-2 function is Cool Control)
Select the type in accordance with the hardware configuration for
Output-2 (OP2).
OUTPUT-2 TYPE
(Default : Relay)
Relay
SSR
0 - 20mA
4 - 20mA
0 - 5V
0 - 10V
OP2 EVENT STATUS
(Available if Output2 function is End of Profile)
Selecting ‘ON’ keeps the Output-2 OFF while profile is in progress
and turns ON at the end of profile.
Selecting ‘OFF’ keeps the Output-2 ON while profile is in progress
and turns OFF at the end of profile.
(Default : ON)
OFF
ON
Reverse
Normal
(Default : Normal)
Section 9
OUTPUT-1 TYPE
Select the type in accordance with the hardware configuration for
Output-1 (OP1).
(Default : Relay)
Relay
SSR
0 - 20mA
4 - 20mA
0 - 5V
0 - 10V
Refer Table 9.1 for parameter description & settings.
(Default : None)
None
Alarm-1
Cool Control
End Of Profile
