11
User Manual
neuro 102 Plus
Parameter Description
Settings
(Default Value)
COOL PULSE TIME
(Available for Pulsed On-Off Control with bi-directional
mode)
Sets the total ‘On + Off’ pulse time in seconds for Output-2 Relay /
SSR output.
Cool ON Time
to 120.0 Seconds
(Default : 2.0)
0.1 to Value set for
Cool Pulse Time
(Default : 1.0)
HEAT POWER LOW
(Available for PID Control only)
Sets the minimum % output power limit for Output-1.
0 to Heat Power High
(Default : 0)
HEAT POWER HIGH
(Available for PID Control only)
Sets the maximum % output power limit for Output-1 .
Heat Power Low to 100
(Default : 100)
COOL HYSTERESIS
(Available for On-Off or Pulsed On-Off Control with bi-
directional mode)
Sets differential (dead) band between On-Off switching for
Output-2. Defined in same units and resolution as that for PV.
COOL PULSE-ON TIME
(Available for Pulsed On-Off Control with bi-directional
mode)
Sets the ON pulse time in seconds for Output-2 Relay / SSR
output.
COOL POWER LOW
(Available for PID Control with bi-directional, that is, Heat-
Cool mode)
Sets the minimum % output power limit for Output-2.
0 to Cool Power High
(Default : 0)
0.1 to Value set
for Pulse Time
(Default : 1.0)
PULSE-ON TIME
(Available for Pulsed On-Off Control only)
Sets the ON pulse time in seconds for Output-1 Relay / SSR
output.
COOL POWER HIGH
(Available for PID Control with bi-directional, that is, Heat-
Cool mode)
Sets the maximum % output power limit for Output-2.
Cool Power Low to 100
(Default : 100)
1 to 9999 counts
(Default : 2)
