Commander T Series PB# 4100032
Rev.C 03/12
PowerBoss, Inc. Copyright 2011
Page 59
LUBRICATION
Gasoline and LP Engines: Use any SF or SG rated
oil meeting API specifications and suited to seasonal
temperatures.
Refer to the Engine Manufacturer’s Operator Manual for
these specifications.
Changing Engine Oil
1. Place a drain pan under the lowest end of the
engine.
2. Remove the drain plug and allow the oil to drain into
the pan.
3. Remove the used oil filter and replace with a new
one.
4. Dispose of the oil and oil filter in an approved
manner.
5. Remove the engine oil cap, add oil in the amounts
listed in the engine manual, then secure the cap.
LUBRICATION POINTS
Steering Fork Assembly and Steering Link Ball
Joints
The steering fork assembly and steering link ball joints must
be lubricated every 500 hours with grease, The steering fork
assembly has 1 grease point and the steering link has two
ball joint with one grease point each.
PREVENTATIVE MAINTENANCE
STEERING LINK
BALL JOINT
LUBRICATION
POINTS
STEERING FORK
ASSEMBLY
LUBRICATION POINT
