PowerBoss, Inc. Copyright 2011
Commander T Series PB# 4100032
Rev. C 03/12
Page 30
MACHINE OPERATION
SWEEPING / SCRUBBING CONTROLS AND
INDICATORS
BROOM CONTROL LEVER
The broom control lever activates or deactivates the brooms
and scrub brushes. The lever is the second lever to the left of
the instrument panel. The lever has three control positions.
1. Push the lever forward to the brushes on position.
This activates the main broom, side broom, and
scrub brushes.
2. Pull the lever back to the side broom off position.
This will deactivate the side broom. The main broom
and scrub brushes will be remain activated.
3. Place the lever in the center of the slot. This will
deactivate the side broom, main broom and scrub
brushes.
NOTE: The main broom, side broom, and scrub
brushes may be raised or lowered
independently.
NOTE: The CE models are equipped with auto
broom shutoff which prevents brooms
from operating when hopper is raised.
MAIN BROOM HANDLE
The main broom handle to the immediate left of the
instrument panel, raises and lowers the main broom. The
handle has three control positions, raise, normal and float.
1. Push the handle forward to the normal position for
typical sweeping applications.
2. Push the handle forward to the float position for
surfaces that are extremely uneven.
NOTE: Frequent use of this position will reduce
the main broom life.
3. Pull the handle back to the raise position lift the
broom when not sweeping.
SIDE BROOM HANDLE
The side broom handle to the immediate right of the
instrument panel, raises and lowers the side broom.
• When not sweeping, the side broom should remain in
the RAISE position.
• To lower the side broom, push the handle forward to
the LOWER position.
