Commander T Series PB# 4100032
Rev.C 03/12
PowerBoss, Inc. Copyright 2011
Page 45
MACHINE OPERATION
RECOVERY TANK
9” ACCESS CAPS
SOLUTION TANK
6” FILL CAP
RECOVERY TANK
9” ACCESS CAP
SOLUTION TANK
6” ACCESS CAP
7. Spray the tank with clean water, flushing all sludge
out of the access ports.
8. Remove the ball and float. Rinse and reinstall.
9. Drain the tank completely and reinstall the drain
plug.
10. Return the drain hose to the storage hook at the left
side scrub door area beneath the floor pan.
11. Replace the 9” access caps removed in step four.
SQUEEGEE WAND (OPTION)
This attachment allows the operator to vacuum spills
and standing water in areas which the machine cannot
maneuver.
1. Remove the hose from the squeegee tool.
2. Attach the adapter to the squeegee hose.
3. Connect the squeegee wand to the adapter.
4. Turn on impeller
5. Set the engine at a high speed and vacuum the
spills or standing water.
