PowerBoss, Inc. Copyright 2011
Commander T Series PB# 4100032
Rev. C 03/12
Page 26
THROTTLE (DIESEL)
The throttle adjusts the engine speed from idle to the
operating speed.
1. Press the button and pull the throttle out for normal
operation to ensure proper broom speed.
2. Press the button and push the throttle in for idle
speed.
GLOW PLUG BUTTON (DIESEL ONLY)
The glow plug button,when depressed will aid in cold
starting. The diesel V1505 is equipped with 4 glow plugs.
The ignition switch must be turned to the IGN position before
pressing the glow plug button. Press and hold the glow plug
button for 10 to 20 seconds before starting the engine.
MURPHY SWITCH (DIESEL ONLY)
In the event that the engine water temperature rises above
226 degrees or oil pressure drops below 7 psi, this switch
will pop out and shut the engine off.
CAUTION
When the Murphy switch is tripped, it indicates
a service issue that requires maintenance. Do
not attempt to restart the engine.
SEAT ADJUSTMENT
The drivers seat is adjustable to provide the most
comfortable position for the operator. The adjustment lever
is at the bottom right of the seat. While sitting in the seat,
push the lever to the right and pull forward or push back on
the seat. Release the lever when the seat is in the proper
location.
PARKING BRAKE
The hand brake is engaged by lifting up on the lever. The
parking brake operates the mechanical drum brakes on the
front two wheels.
BRAKE
The brake is engaged by pressing down on the pedal, it is
used for stopping in normal operation of the unit.
MACHINE OPERATION
