PowerBoss, Inc. Copyright 2011
Commander T Series PB# 4100032
Rev.C 03/12
Page 70
Side Broom Height (Wear) Adjustment
1. Stop the engine and lock the parking brake.
2. Position the side broom handle in LOWER position.
3. Loosen the side broom adjusting nuts located on the
exterior of the side broom arm assembly.
4. Adjust the side broom height be sliding the broom
assembly up or down until proper floor contact is
made in the “10 to 3 o’clock” position.
5. After adjustment, tighten the adjusting nut.
PREVENTATIVE MAINTENANCE
SIDE BROOM
HEIGHT
ADJUSMENT
NUTS