manualshive.com logo in svg

PowerBoss commander t82 europe, Руководство пользователя, Страница: 54 / 96

Поделиться
Скачать
PowerBoss commander t82 europe Скачать руководство пользователя страница 54

 PowerBoss, Inc. Copyright 2011

Commander T Series PB# 4100032  

Rev.C 03/12

Page  54

Air Filter Cleaning

1.  Once you have removed the air filter elements, 

empty the dust cup and clean the interior of  the air 

filter housing.

2.  Use an air hose to blow out the air filter elements. 

Air pressure should be 100 psi or less.

Air Filter Inspection

1.  After you clean the air filter elements, check the 

elements for holes by passing a light bulb inside it.

PREVENTATIVE MAINTENANCE

Air Filter Installation

1.  Wipe out the air cleaner housing with a damp cloth. 

Be sure all dirt is removed.

2.  Install the cleaned replacement filter elements so 

that the fins are at the far end of the  

 

housing. Be careful not to damage the fins.

3.  Replace the rubber plug in the dust cup.
4.  Replace dust cup, being sure embossed word “top” 

on cup is positioned correctly    

(up).

5.  Tighten the ring clamp or retaining clips.
6.  Check the condition of intake hoses and clamps. 

Close engine cover.

Содержание commander t82 europe

































































































Отзывы:

Нет отзывов