Commander T Series PB# 4100032
Rev.C 03/12
PowerBoss, Inc. Copyright 2011
Page 81
Floor Clearance
In order to perform properly, the hopper must maintain a
distance of 3½” (8.89 cm) from the floor to the rear hopper
entrance lip. The front of the hopper should be adjusted so
that the front bumper aligns with the hopper frame where
the two meet. When properly adjusted, the front edge of the
hopper will be 5” (12.7 cm) to 6” (15.24 cm) from the floor.
Refer to service manual for adjusting floor clearance.
PREVENTATIVE MAINTENANCE
