PowerBoss, Inc. Copyright 2011
Commander T Series PB# 4100032 Rev
.C 03/12
Page 32
MACHINE OPERATION
SCRUB HEAD SWITCH
The scrub head switch activates an actuator to raise and
lower the scrub deck. The scrub deck height can be adjusted
using the scrub head switch. The scrub deck gauge visually
indicates the deck height.
SCRUB DECK GAUGE
The scrub deck gauge indicates the position of the scrub
deck not the scrub deck pressure on the floor.
IMPELLER LEVER
The impeller lever activates and deactivates the vacuum
and is located in the upper left corner on the control panel.
Push the lever forward to the on position to activate the
vacuum. Pull the lever back to the off position to deactivate
the vacuum. Vacuum provides suction to the hopper and the
squeegee.
IMPELLER STOP CONTROL
The impeller stop control adjusts the amount of vacuum
supplied to the squeegee and hopper. Push the control in for
normal operation, with equal vacuum supplied to the hopper
and the squeegee. Pull out the control cable to limit the
vacuum supplied to the hopper and provide more vacuum to
the squeegee.
SQUEEGEE SWITCH
The squeegee switch raises and lowers the squeegee
mechanism. The squeegee height is mechanically adjustable
and will need adjustment as the squeegee blade wears.
SOLUTION LEVER
The solution lever controls the amount of solution applied to
the floor. Push the lever forward to begin the flow, adjusting
to the desired amount of flow. This is a gravity feed system
with a maximum flow of 3 gpm.
SOLUTION TANK EMPTY INDICATOR
The solution tank empty indicator is located on the front of
the left side control panel, and illuminates when the solution
tank is empty.
RECOVERY TANK FULL INDICATOR
The recovery tank full indicator is located on the front of the
left side control panel, and illuminates when the recovery
tank is full.
