PowerBoss, Inc. Copyright 2011
Commander T Series PB# 4100032
Rev.C 03/12
Page 38
SWEEPING
1. Lower the main Broom, push the handle forward to
the NORMAL or FLOAT position.
NOTE: When sweeping extremely uneven floors,
position the main broom handle at FLOAT
on the handle slot.
2. If desired lower the side broom, push the handle
forward to the LOWER position.
3. Activate the broom motors:
• To activate both main and side brooms push the
broom control lever forward to the BRUSHES ON
position.
• To activate the main broom only pull the broom control
lever back to the SIDE BROOM OFF position.
4. Turn on the vacuum impeller, Push the impeller
lever forward to the on position.
5. Drive the machine over the area to be swept.
MACHINE OPERATION
EMPTYING THE HOPPER WITH HIGH DUMP
FEATURE
1. Drive the machine to the dumping area.
2. Use the directional control pedal to position the
machine so that the space between the machine
and the container or dumpster is adequate to raise
the hopper.
3. Reduce the engine speed.
4. Pull back Lever 1(press and hold the unlock hopper
button if equipped) to the RAISE position and hold
until the bottom of the hopper is high enough to clear
the top of the container.
WARNING
Never place your hands or other body parts
near the lift arms when the hopper is operating.
