PowerBoss, Inc. Copyright 2011
Commander T Series PB# 4100032
Rev.C 03/12
Page 44
DRAINING THE RECOVERY TANK
1. Park the machine on a level surface at an approved
drainage site with the left rear of the machine beside
the drain access.
2. Engage the parking brake.
3. Turn the machine OFF.
4. Open the left scrubhead access door.
MACHINE OPERATION
5. Remove the flexible drain hose from its storage
hook. Pull out the drain hose for the required reach
to the access.
6. Place the end of the drain hose on or in the
approved drain access.
7. Loosen and remove the drain plug.
8. Drain the tank completely and reinstall the plug.
9. Reposition the drain hose on its storage hook.
CLEANING THE RECOVERY TANK
NOTE: The Recovery Tank Should Be Cleaned
After Every Shift.
1. Position the machine at an approved drain area.
2. Engage the parking brake.
3. Shut off the machine.
4. Remove the two 9” access caps at the rear of the
unit.
5. Remove the drain hose and position it over the
approved drain opening.
6. Loosen and remove the drain plug.
DRAIN PLUG
RECOVERY TANK
DRAIN HOSE
