Pioneer DVR-7000, Руководство по эксплуатации

Страница: 64 / 104

64
En
Recording from an External Input 7
4 Press DISCNAVI (for a VR mode disc) or TOP
MENU (for a Video mode disc).
The Discnavi or Title List screen appears.
• If a VR mode disc is loaded, make sure Original is
selected (press PLAYLIST to switch between
Playlist and Original screens).
Greenery
1 2 3
4 5
5 Select ‘DV Record’ from the menu.
• DV Record only works when the digital camcorder
is in VTR mode with a tape loaded.
6 Find the place on the camcorder tape that you
want to start recording from.
For best results, pause playback at the point from
which you want to record.
• Depending on your camcorder, you can use this
recorder’s remote to control the camcorder using
the
7
,
3
and
8
and the Jog dial .
7 Press ENTER to start recording.
• Recording is automatically paused if the recorder
detects no signal, or a copy-protected signal.
Recording restarts when there is a non-copy-
protected signal.
• You can pause or stop the recording by selecting
Rec Pause or Rec Stop . You cannot control the
camcorder from this remote control during
recording.
• If you restart recording after stopping the
camcorder, the first few seconds of the camcorder
tape will not be recorded. Use the pause button on
your camcorder instead and recording will start
immediately.
• In Video mode, the final frame of the recording may
remain displayed on screen for a while after
selecting
Rec Stop .
• While recording, you cannot exit the DV recording
screen using the DISCNAVI or RETURN buttons.
Recording from the DV output
You can record from a non-copy-protected DVD
disc to a camcorder connected to the
DV IN/
OUT jack.
1 Connect the camcorder to the DV IN/OUT
jack of this recorder.
2Load the disc you want to record and find the
place you want to start recording from.
3 Start recording on the camcorder.
4 Press
3
PLAY to play the disc.