Commissioning
Operating Manual PSENvip R, PSENvip R LR,PSENvip E
1003449-EN-06
| 89
7.2.1.3
Align receiver
}
Attach an adjustment template with magnets to the upper tool. The tip of the upper tool
must sit in the notch on the stop of the adjustment template.
}
Align the alignment grid of the adjustment template to the contour of the upper tool.
Align the
alignment grid
on the upper
tool
Centre point of
the upper tool
in the notch on
the back stop
Open the
Adjustment
menu in the web interface. You will see the tool displayed with the
bending lines and a template. The example below shows a tool on which the bending line is
approximately 7 mm to the left of centre.
Fig.: Incorrect adjustment
The receiver is correctly aligned with the transmitter when
}
The cross-hairs of both adjustment templates overlap
}
The quadrants form a full circle and
}
The centre point of the upper tool is on the bending line.