Safety
Operating Manual PSENvip R, PSENvip R LR,PSENvip E
1003449-EN-06
| 18
3.2
Safety guidelines
Failure to keep to these guidelines will render all warranty and liability claims invalid:
}
All health and safety / accident prevention regulations for the particular area of application
must be observed.
}
Before using the unit it is necessary to perform a safety assessment in accordance with
the Machinery Directive 2006/42/EC.
}
Please note that manufacturers and company operators who use the PSENvip are them-
selves responsible for agreeing the regulations with the relevant authorities and comply-
ing with them.
3.2.1
Use of qualified personnel
The products may only be assembled, installed, programmed, commissioned, operated,
maintained and decommissioned by competent persons.
A competent person is a qualified and knowledgeable person who, because of their train-
ing, experience and current professional activity, has the specialist knowledge required. To
be able to inspect, assess and operate devices, systems and machines, the person has to
be informed of the state of the art and the applicable national, European and international
laws, directives and standards.
It is the company’s responsibility only to employ personnel who
}
Are familiar with the basic regulations concerning health and safety / accident prevention,
}
Have read and understood the information provided in the section entitled Safety
}
Have a good knowledge of the generic and specialist standards applicable to the specific
application.
Competent personnel must also be familiar with how to use and test ESPE and be author-
ised to do this by the ESPE operator.
3.2.2
EMCD
The PSENvip is designed for use in an industrial environment. It is not suitable for use in a
domestic environment, as this can lead to interference.
3.2.3
Warranty and liability
All claims to warranty and liability will be rendered invalid if
}
The product was used contrary to the purpose for which it is intended,
}
Damage can be attributed to not having followed the guidelines in the manual,
}
Operating personnel are not suitably qualified,
}
Any type of modification has been made (e.g. exchanging components on the PCB
boards, soldering work etc.).
3.2.4
Safety during commissioning, installation and operation
Please read the guidelines stated in the chapters entitled "Commissioning", "Installation"
and "Operation".
