© 2018
Order #XXXXX
Post
Plate
Clamshell
Set
Screw
Hex
Nuts
Clamshell
A10
Clamp
Graphic
Graphic
Completed Assembly
Rotate clamshell
to turn iPad from portrait
to landscape orientation.
Steps:
1) Attach base to post, using bolt.
2) Attach plate to post, using set screw.
NOTE: Plate must rotate left and right, before installing clamshell.
3) Attach clamshell to plate, using hex nuts.
4) Attach graphics to A10 clamps. See
A10 Clamp
detail.
5) Insert iPad into clamshell, then feed cords through holes in post.
See
Cord Management For iPad
detail.
Base
Bolt
Tighten set screw to
secure A10 to post.
A10 Clamp
Tighten knob to secure
graphic in place.
Cord Management for iPad
Attach iPad cord to supplied USB extension
cord. Feed USB cord through top hole of
post, then out bottom hole of post.
Connect to power.
Cord
Access
iPad
Lock
Lock
Clamshell
Foam Lining
Removed
Home Button Shield
Optional Cover for Home Button
1) Remove foam lining from inside bottom of
clamshell.
2) Attach Home Button Shield with double-sided
tape to inside of clamshell, keeping top of
shield flush with clamshell opening.
NOTE: This is a permanent fix and can’t be
easily removed.
MOD-1335 iPad Kiosk
SETUP INSTRUCTIONS
If you would like to tell us about your experience with your setup instructions please email us at
