PIAGGIO NRG POWER PUREJET, Руководство по ремонту, Страница: 57 / 248

- To make sure the lamps work, apply a +12V volt-
age to the WHITE-BLUE wire of the turn indicator
switch for the right lamps and to the PINK wire for
the left lamps.
See also
Air duct
level indicators
Composed of the petrol level transmitter, analogue
reading instrument and reserve warning lamp.
In the event of a fault check:
- Fuel reserve warning lamp
- The 5A fuse indicated in the photo by removing
the air duct.
- Make sure the voltage at the WHITE wire of the instrument unit is +12V
- Using a multimeter check the ohm values of the fuel level by moving the arm with float.
Limit values:
empty tank position = 87 - 103 Ohm
½ tank position = 34 - 42 Ohm
full tank position < or equal to 7 Ohm
See also
Air duct
The oil mix lamp carries out a timed check for 3
seconds every time the key is switched to ON. The
check is controlled by the turn indicator device
which applies a 12V voltage to the oil warning
lamp.
If the check is not carried out when the key is
switched to ON, check:
- If the lamp is working
- The 5A fuse indicated in the photo by removing
the air duct.
- Use a multimeter to check if there is 12V voltage at the 2 YELLOW oil mix lamp control wires when
the key is turned to ON
- The oil mix lamp is working
NRG Power Purejet
Electrical system
ELE SYS - 13