PIAGGIO NRG POWER PUREJET, Руководство по ремонту, Страница: 126 / 248

Specification Desc./Quantity
G60 P1160 Air injector The ECU has detected an interruption in the injec-
tor circuit. The fault can only be recognised in the
presence of phase - rpm
Light on
Faults are reported by a dark dot on one of the
reference columns. The recognition occurs in 3
modes:
- Dot on the column marked « A ». The fault is
«CURRENT» and present during the check
- Dot on the column marked with « O ». The letter
denotes «OCCURRED». The fault has occurred
and has been fixed during the same period of use.
The fault may be intermittent and not present dur-
ing the check
- Dot on the column marked with « M ». The letter
denotes «STORED», the faults displayed in
«CURRENT» or «OCCURRED» automatically
shifts to «STORED» after switching to «OFF». The
passage to «STORED» always occurs at the end
of the period of use.
N.B.
THE FAULT CAN BE SIGNALLED IN A SINGLE
MODE. THAT IS, THE «CURRENT» AND
«STORED» CONDITIONS CANNOT COEXIST
.
Parameters stored
This function displays the parameters stored previously. As already specified in the description of the
parameter function, parameters are stored by pressing the «TAB» key at the selected time.
The diagnostic tester can contain a single memorisation.
It is cancelled out automatically as soon as power is disconnected from the tester.
Error clearing
This function clears any faults and settings recorded by the ECU auto-diagnostic function.
Active diagnosis
pure jet injection
NRG Power Purejet
INJ PJ - 10