manualshive.com logo in svg

PIAGGIO 633929(IT), Руководство по обслуживанию станции, Страница: 166 / 314

Поделиться
Скачать
PIAGGIO 633929(IT) Скачать руководство пользователя страница 166

- Properly wash and blow the components of the

sprayer maximum circuit, the diffuser and the noz-

zle.

- Introduce the sprayer in the carburettor body with

the shortest cylindrical part directed to the diffuser.

- Assemble the diffuser making sure the sprayer is

being adequately inserted and lock it.

-Assemble the maximum nozzle.

- Check that the tapered pin does not show signs

of wear on the sealing surfaces of the shock ab-

sorber pin and the return clamp.

- Replace the rod if worn out.

- Check that the float is not worn on the pin housing or on the contact plate with the plunger and that

there are no fuel infiltration.

- Replace it in case of anomalies.

- Introduce the float with the rod on the fuel feeding tube side.

N.B.

INTRODUCE THE RETURN SPRING ON THE FLOAT PLATE ADEQUATELY

Engine

MP3 125

ENG - 72

Содержание 633929(IT)



























































































































































































































































































































Отзывы:

Нет отзывов