Photron FASTCAM ultima APX-i2, Руководство по оборудованию

Страница: 99 / 147

FASTCAM-ultima APX-i2 Hardware Manual
-97-
4.11.2. Setting GENERAL OUT Signals
This section describes how to set up signals output from the GENERAL OUT
connector.
1. Press the MENU button on the keypad to display the menu list.
2. Move the joystick to select the [GENERAL OUT] menu.
3. The GENERAL OUT menu is now displayed. The items are as follows:
Menu Display
Description Signal
EXPOSE
POS Outputs sensor’s exposure duration in HIGH
level. TTL level, Positive
logic
EXPOSE
NEG Outputs sensor’s exposure duration in LOW
level. TTL level, Negative
logic
REC POS Outputs recording duration in HIGH level.
TTL level, Positive
logic
REC NEG Outputs recording duration in LOW level.
TTL level, Negative
logic
TRIGGER
POS Transfers received external trigger signal in
HIGH level. TTL level, Positive
logic
TRIGGER
NEG Transfers received external trigger signal in
LOW level. TTL level, Negative
logic
READY POS
Outputs signal in HIGH level when in
REC-trigger wait TTL level, Positive
logic
READY NEG
Outputs signal in LOW level when in
REC-trigger wait TTL level, Negative
logic
READY POS/NEG
By setting to POS/NEG, a signal of the specified level is output when the camera is in
REC-trigger waiting status (READY status for the START trigger mode, and ENDLESS
status for CENTER, END or MANUAL mode). This function is only effective in the
START, CENTER, END or MANUAL mode.
Note: When you use these signals to drive the whole system, be sure to check the
nature of the signals.