Photron FASTCAM ultima APX-i2, Руководство по оборудованию

Страница: 78 / 147

FASTCAM-ultima APX-i2 Hardware Manual
-76-
TTL change over signals to be fed to the GENERAL IN connector are defined as
follows (e.g. for positive signal setting):
GENERAL_IN Input “H” Change to higher rate from the next frame
GENERAL_IN Input “L” Change to lower rate from the next frame
Parameter Setting for Dual Framing Rate Mode Operation
The following shows how to set parameters for a higher and lower framing rates.
1. Referring to Section 3.2. [Selecting Frame Rate], select a framing rate for the
higher rate, for example 2000 fps.
2. Press the MENU button on the keyboard to display the menu list.
3. Move the cursor by the joystick to [TWO STAGES] and press the joystick down to
select the item.
4. The TWO STAGE menu appears on the screen. In the right-hand area, framing
rate ratios of 1/2, 1/4 and 1/8 are shown to choose from.
RANDOM FRAME
MANUAL TRIGGER
RANDOM M TRIGGER
RANDOM E TIMES
TWO STAGES
PARTITION
OSD SELECT TWO STAGES
1/2
1/4
1/8
ID01/01 LIVE 13:07:41
RANDOM 200FR
2048FR/1.024s
5. Move the cursor to one of the ratios, for example 1/4, and press the joystick down
to select it.
6. Now the system has been set to record at 2,000 fps for the higher rate and 500 fps
for the lower rate.
7. Press the MENU button to exit and go back to the LIVE screen.