Photron FASTCAM ultima APX-i2, Руководство по оборудованию

Страница: 64 / 147

FASTCAM-ultima APX-i2 Hardware Manual
-62-
Recording in MANUAL Mode
After presetting the numbers of frames to record before and after a trigger as shown in
the above example, follow the below procedure to record in the MANUAL trigger mode:
1. Following Section 3.5, make sure the camera is in the LIVE mode, and select the
MANUAL trigger mode.
2. Press the REC READY button on the keypad. The camera is now in the READY
mode. Make sure that the [LIVE] indication has turned to [READY].
3. Press the REC button on the keypad when your target event is expected to take
place very soon. Note the indication on the screen has turned to [ENDLESS]
showing that the camera is now recording the images of the subject in the memory
going around from end to end repeatedly.
4. At the moment you have seen the event of your interest taking place, press the
REC button again. The camera stops. It has recorded in its memory1948 frames
before and 100 frames after the trigger, respectively, as preset in the above
example. Make sure that the indication on the screen has turned from [REC] to
[LIVE].