Philips SOPHO 2000 IPS, Руководство пользователя

Страница: 311 / 880

– 293 –
NWA-008845-001 Rev.5.0
32ch1005.fm
30DTI Assignment
NOTE:
When using the PN-DTA card, the following switch setting is required to set E1 interface.
SW3-1: OFF (E1 mode), SW3-2: OFF (DTI mode)
DESCRIPTION DATA
Assign an AP number to the DTI card.
The AP number assigned must match the
SENSE switch setting on the DTI card. •
(1)
(2)
Y=0
04-15, 20-31: AP No.
09: DTI card
Specify the AP highway channel for 30DTI
card. •
(1)
(2)
Y=1
04-15, 20-31: AP No.
0 : Use Expanded Highway channel
(128 time slots)
1 : Use Basic Highway channel
(128 time slots)
Assign trunk number to each channel number
on the DTI card. Channel 0 and 16 cannot be
assigned.
NOTE: The system allocates time slots to
consecutive channels from lowest to
the highest channel number as-
signed.
To minimize the number of time slots
allocated, assign trunk numbers to
consecutive channels on each card.
Never skip channels in CM07.
•
(1)
(2)
Y=01
XX ZZ
XX: 04-15, 20-31: AP No. assigned by
CM05 Y=0
ZZ : 01-15, 17-31: Channel No. of 30DTI
D000-D255: Trunk No.
Any trunk number already assigned by
CM10/CM14 cannot be used.
Assign a trunk route number to each DTI.
NOTE: DTI route must be separated from
any analog trunk route.
•
(1)
(2)
Y=00
000-255: Trunk No. assigned by CM07
Y=01
00-63: Trunk Route No.
START
CM05
INITIAL
INITIAL
CM07
INITIAL
CM30
A
JULY/01/2006
DIRECT DIGITAL INTERFACE
PROGRAMMING