Philips SOPHO 2000 IPS, Руководство пользователя

Страница: 786 / 880

– 768 –
NWA-008845-001 Rev.5.0
32ch2001.fm
AP INITIALIZATION (PN-AP00-B WITH AP00 PROGRAM)
This section explains the data assignment to make the AP active.
You can skip the data assignment explained on this section, if one of the following AP related features has
been activated; Station Message Detail Recording (SMDR), Message Center Interface (MCI), Property
Management System (PMS), or Hotel Printer. You can distinguish whether the AP is active or not by the
RUN lamp indication. The RUN lamp flashes on green color when the AP is in active.
When you install the AP00 for the first time, you should assign the data shown below.
DESCRIPTION DATA
Assign an AP number to the AP00 card.
The AP number must match the SENSE switch
setting on the AP00 card. •
(1)
(2)
Y=0
04-15, 20-31: AP No.
04: AP00 card
On the AP00 card, set SW1 switch as shown
below.
SW1-4 should be set as follows;
ON : The AP No. is 04-15
OFF: The AP No. is 20-31
Load the initial data into the AP00 card. (1)
(2) 0000
CCC
On the AP00 card, set the SW1 switch as
shown below:
SW1-4 should be set as follows;
ON : The AP No. is 04-15
OFF: The AP No. is 20-31
START
CM05
INITIAL
SW 1
ON
: POSITION TO BE SET
4
3
2
1
CMD101
AP OFF LINE
SW 1
ON
: POSITION TO BE SET
4
3
2
1
END
JULY/01/2006
HOTEL SYSTEM PROGRAMMING
AP INITIALIZATION (PN-AP00-B WITH AP00 PROGRAM)