Philips SOPHO 2000 IPS, Руководство пользователя

Страница: 330 / 880

– 312 –
NWA-008845-001 Rev.5.0
32ch1006.fm
DESCRIPTION DATA
When providing DISA to the DID calls, assign
the data for converting the received digits to
DISA. See
DID DIGIT CONVERSION .
Page 303
•
•
•
•
(1)
(2)
Y=01 Day Mode
Y=02 Night Mode
Y=03 Mode A
Y=04 Mode B
000-999: Number Conversion Block No.
assigned by CM76 Y=00/90
D16: DISA
Assign the ID Code Development number for
DISA. •
(1)
(2)
Y=A0
2
0-9: ID Code Development No. 00-09
NOTE:
CM2A Y=00-09 is determined by this
data.
Assign the ID Code for DISA. •
(1)
(2)
Y=00-09 ID Code Development No. 00-09
X-XX...XX (Maximum 16 digits): ID Code
for DISA
0000-2999: ID Code Pattern No.
Assign the desired Trunk Restriction Class for
each ID Code Pattern number. •
(1)
(2)
Y=11
0000-2999: ID Code Pattern No.
1 : Unrestricted (RCA)
2 : Non-Restricted-1 (RCB)
3 : Non-Restricted-2 (RCC)
4 : Semi-Restricted-1 (RCD)
5 : Semi-Restricted-2 (RCE)
6 : Restricted-1 (RCF)
7 : Restricted-2 (RCG)
8 : Fully-Restricted (RCH)
Assign the desired Service Restriction Class A
to each ID Code Pattern number. The features
available in each class are assigned by CM15. •
(1)
(2)
Y=12
0000-2999: ID Code Pattern No.
00-15 :
Service Restriction Class A
Assign the desired Service Restriction Class B
to each ID Code Pattern number. The features
available in each class are assigned by CM15. •
(1)
(2)
Y=13
0000-2999: ID Code Pattern No.
00-15 :
Service Restriction Class B
A
CM76
CM2A
B
DIRECT INWARD SYSTEM ACCESS (DISA)