Philips SOPHO 2000 IPS, Руководство пользователя

Страница: 846 / 880

– 828 –
NWA-008845-001 Rev.5.0
32ch2001.fm
When printing the set/cancel/execution record of hotel features such as Automatic Wake Up/Do Not Dis-
turb/Room Cutoff/Message Waiting, do the following programming in addition to the programming of MP
built-in PMS on IP.
[Series 3600 software required]
AP Initialization (PN-AP00-B/PN-AP00-D with MRCA program)
You can distinguish whether the AP is active or not by the RUN lamp indication. The RUN lamp flashes
on green color when the AP is in active.
When you install the AP00 at first time, you should assign the data shown below.
DESCRIPTION DATA
Assign an AP number to the AP00 card. The
AP number must match the SENSE switch set-
ting on the AP00 card. •
(1)
(2)
Y=0
04-15, 20-31: AP No.
45: PN-AP00-B/PN-AP00-D card with
MRCA program
On the AP00 card, set SW1 switch as shown
below.
SW1-4 should be set as follows;
ON : The AP No. is 04-15
OFF: The AP No. is 20-31
Load the initial data into the AP00 card. (1)
(2) 0000
CCC
On the AP00 card, set the SW1 switch as
shown below.
SW1-4 should be set as follows;
ON : The AP No. is 04-15
OFF: The AP No. is 20-31
START
CM05
INITIAL
SW 1
ON
: POSITION TO BE SET
4
3
2
1
CMDD99
AP OFF LINE
SW 1
ON
: POSITION TO BE SET
4
3
2
1
END
JULY/01/2006
HOTEL SYSTEM PROGRAMMING
PROPERTY MANAGEMENT SYSTEM INTERFACE