manualshive.com logo in svg

PerkinElmer QuantaSmart 1694267, Справочное руководство

Поделиться
Скачать
PerkinElmer QuantaSmart 1694267 Скачать руководство пользователя страница 128

 CHAPTER 6

 

 118

PerkinElmer Life and Analytical Sciences 

Number of Points

Enter the number of points you would like to use to manually generate the Alpha 

and Beta misclassification curves. This is not required if Automatic is chosen in the 

Discriminator Type. Ten points are used if Automatic is chosen. Up to 15 points 

can be used if Manual is chosen.

Discriminator Computed

This field represents the optimal Pulse Decay Discriminator value, as determined 

by the instrument.

Discriminator in Use

This value represents the Pulse Decay Discriminator value currently in use.

Count Mode

Normal is the Count Mode used to count the Alpha and Beta Standards.

Note: This field is for information only.

Coincidence Time

This field represents the Coincidence Time of 18 

η

s used when counting the Alpha 

Beta Standards Assay.

Note: This field is for information only in this library.

Delay Before Burst

This field represents the Delay Before Burst time of 75 

η

s used when counting the 

Alpha Beta Standards Assay.

Note: This field is for information only in this library.

Date Counted

This field represents the date on which the Alpha Beta Standard Assay was 

counted.

Note: This field is for information only.

Time Count Ended

This field represents the time at which the Alpha Beta Standard Assay was 

completed.

Note: This field is for information only.

Add

Click this button to add a line to the table and enter a new Alpha Beta Standard 

Set.

Содержание QuantaSmart 1694267



























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды