Paul CLIMOS F 200, Оригинальная инструкция по эксплуатации

Страница: 55 / 68

55
Technical description 3.9
Versions 3.9.1
CLIMOS Basic – right (type A) / left (type B)
Ventilation unit with counter flow enthalpy exchanger without integrated defroster
CLIMOS Comfort – right (type A) / left (type B)
Ventilation unit with counter flow enthalpy exchanger with integrated defroster
Designs layout air connection 3.9.2
Design right (type A) Design left (type B)
Tab. 40: Overview types of designs right (type A) and left (type B)
Technical specification 3.9.3
General specification Description / value
Type of heat exchanger Enthalpy exchanger with polymer membrane
Casing / internal lining Steel sheet galvanised, powder-coated, thermal bridge-
free; internal lining made of expanded polypropylene EPP
for thermal and sound insulation
Pipe connections DN 125 (sleeve dimensions)
Weight 25 kg
Electrical connection 230 Vac, 50-60 Hz;
2 m power cable with plug connection of a low power
device
Connected load 0.14 / 0.75 kW (without / with integrated defroster)
Protection class
I
Degree of protection IP 30
Limitations of use -20 to 40 °C
Assembly site Frost-free interior area;
Ambient conditions: < 70 % r. F. at 22 °C
Installation position Ceiling-hanging or lying (horizontally)
Wall-mounted (horizontally or vertically)
Exhaust air connection must always be located at the top!
Inclined wall (horizontally or vertically)
Exhaust air connection must always be located at the top!
Tab. 41: Generell specification