Paul CLIMOS F 200, Оригинальная инструкция по эксплуатации

Страница: 19 / 68

19
2.3.2.4 Submenu Automatic
Two operating modes are provided in the automatic mode:
•
Automatic timing
•
Automatic sensor
The desired operating mode of the automatic mode is selected using the navigation buttons (red
background of the text) and by setting the checkmark, and confirmed with Enter.
2.3.2.4.1 Automatic timing
Symbol Designation Explanation / actions
Button
Calendar By touching the button Calendar, a weekday (Mon...Sun) or a group
of weekdays (Mon-Fri; Sat-Sun) is selected, the desired fan speed is
preselected.
Button
Fan speed 0
(FS0) The fans stand still.
Button
Fan speed 1
(FS1) Reduced ventilation
Button
Fan speed 2
(FS2) Nominal ventilation
Button
Fan speed 3
(FS3) Purge ventilation
Cursor The cursor marks the time in the ¼-hour-range. Using the navigation
buttons, the cursor is navigated across the time slot in which the
selected fan speed shall be active.
Tab. 8: Parameterization automatic timing
By selecting a group of days (e.g. Mon-Fri), the change data are assigned to each day of the group. Thus,
the settings for the group “Mon-Fri” are then identical to the days “Mon”, “Tue”…”Fri” (or group “Sat-Sun”
identical to days “Sat”, “Sun”). In order to operate the plant with fan speed profiles and time profiles that
differ from day to day, the profile of the respective day (“Mon”…”Sun”) must be changed. Possibly further
changes in the groups “Mon-Fri” or “Sat-Sun” overwrite the previously made settings of the individual
days again!
Fig 7: Automatic timing factory setting, group weekdays Mon-Fri
Display weekday / group
Cursor
Selection weekday / group
SymbolFLS0
Display active fan speed
Display time cursor (Cursor status)
Symbol FS2 (Cursor status)
Symbol FS1
Symbol FS3