Paul CLIMOS F 200, Оригинальная инструкция по эксплуатации

Страница: 43 / 68

43
Buttons
Navigation By touching the navigation buttons, select the submenu Fan
speeds and confirm with the Enter button.
Button
Fan speed 2
(FS2) Activate the fan speed 2 (FS2) by touching the corresponding
button.
Buttons
Navigation Parameterise fan speed 2 (FS2) in accordance with characteristic
curves for the nominal air volume flow
Button
Enter Confirm by touching the Enter button.
Button
Cancel / back By touching Cancel / back button, exit the menu levels until the
start menu appears.
Tab. 28: Step sequence adjustment of the nominal air flow by means of the TFT touch panel
Fig 43: Chart 1, setting values nominal air flow CLIMOS with fan speed 2 (FS2)
3.5.2.2 Adjustment of the nominal air flow with LED control panel
For adjusting the ventilation plant, the speed of the LED control panel which corresponds to the settings
of set value. The seven steps of the LED control panel are factory-set values of the fans according to
Tab. 29. Correspond to the adjusted level for the nominal air flow rate has the nearest set value from
chart 1, Fig 43. During the adjustment of the valves, this fan speed is maintained.
Fan speed LED control panel Setting of set value [%]
1 20
2 33
3 46
4 60
5 73
6 81
7 100
Tab. 29: Setting values nominal air volume flow