Paul CLIMOS F 200, Оригинальная инструкция по эксплуатации

Страница: 46 / 68

46
Button
Fan speed 3
(FS3) Using the button Fan speed 3, activate the FS 3 and
parameterise it with the navigation buttons.
Setting range: FS2 < FS3 < 100 %
Using the b / -, an imbalance can be set.
Buttons
Enter
Cancel / back Confirm by touching the Enter button. By touching the Cancel /
back button, exit the menu level.
Tab. 32: Parameterisation submenu fan speeds
3.6.1.3 Submenu Post-heating
The following settings are made in the submenu supplementary heating:
•
Parameterisation of the duct temperature
•
Selection of the type of supplementary heater battery
o
Electric heater battery
o
Hot water heater battery
Symbol Designation Explanation / actions
Buttons
Navigation Duct temperature
Select by touching the navigation buttons (red background of the
text) and confirm with Enter.
Buttons
+ / - Using the b / -, set the duct temperature.
Buttons
Enter
Cancel / back Confirm by touching the Enter button. By touching the Cancel /
back button, exit the menu level.
Buttons
Navigation Selection Type supplementary heater battery
Select the respective type by touching the navigation buttons (red
background of the text).
Button
Checkmark By touching the Checkmark button, the type of supplementary
heater battery is selected.
Button
Cancel / back By touching the Cancel / back button, exit the menu levels until the
start menu appears.
Tab. 33: Parameterization submenu post-heating
3.6.1.4 Submenu Summer ventilation without by-pass
This menu shows whether summer ventilation without by-pass is possible. The menu can only be
executed, if there is no by-pass.
The following settings are made, () values factory settings
•
Temperature for activating the function (25.0 °C);
•
Hysteresis (0.5 °K)
•
Inactive below (13.0 °C)
Symbol Designation Explanation / actions
Button
Checkmark The symbol shows the feasibility of the menu.