Paul CLIMOS F 200, Оригинальная инструкция по эксплуатации

Страница: 22 / 68

22
2.3.2.8 Submenu Key lock
The user interface of the TFT touch panel can be deactivated with a password-protected key lock.
Symbol Designation Explanation / actions
Password
prompt Entry of the password <11111> and confirmation with Enter. On
the touch pad, “Key lock” is displayed as current status.
Button
Deactivate key
lock After touching the button, the user is prompted to enter the
password for the deactivation of the key lock.
Entry of the password <11111> and confirmation with Enter.
Tab. 13: Activation / deactivation key lock
2.3.2.9 Submenu Summer ventilation without By-pass
In ventilation plants with devices without by-pass flap the summer ventilation serves for free cooling.
When activated, the exhaust air fan is switched off and a heat transfer from the extract air to the supply
air is avoided. To check the temperature conditions for plausibility, the exhaust air ventilator is switched
on for 2 minutes per hour in addition to the presently active fan speed.
This menu shows whether summer ventilation without by-pass is possible. The operating mode, summer
ventilation, may or may not be released. Release of the summer ventilation function is selected with the
buttom “Navigation” (red text backdrop), inserting the tick and pushing “Enter”. Furthermore, the
temperature threshold for activating the summer ventilation function can be set with the buttom
“Navigation” (red text backdrop) and “+ / - “.
When the boost ventilation mode is switched on during the active phase, the summer ventilation is
interrupted during the time the boost ventilation is on.
Abbreviation Designation Explanation / actions
t_sum Temperature
threshold
summer
ventilation
Setting-range temperature threshold: 20 °C…30 °C
The summer ventilation is active when temperature of the extract
air exceeds the set temperature and the intake air temperature at
the device is lower than the extract air at the device.
In addition, the intake air temperature at the device has to be
higher than the set limit of the outside air temperature
Tab. 14: Parameterization temperature threshold summer ventilation without by-pass
In order to avoid the occurrence of draught from a too low temperature of the supply air,
the summer ventilation remains inactive below an outside air temperature limit. The limit
of the minimum outside air temperature can be set between 12 °C ... 20 °C in the main
menu “Setup” (factory setting: 13 °C).
2.3.2.10 Submenu Supply heater
In this menu, an optionally available supplementary heating module (electric heater battery or hot water
heater battery) is displayed. The function of the supplementary heating can be activated or deactivated.
The release supplementary heating is selected using the navigation buttons (red background of the text)
and by setting the checkmark, and is confirmed with Enter.
2.3.2.11 Submenu Ground pipe diverter valve
In this menu, an optionally available flap of the geothermal heat exchanger is displayed. The function of
the flap of the geothermal heat exchanger can be activated or deactivated. The release flap of the
geothermal heat exchanger is selected using the navigation buttons (red background of the text) and by
setting the checkmark, and is confirmed with Enter. Furthermore, the temperature thresholds for switching
of the flap of the geothermal heat exchanger can be selected using the navigation buttons (red
background of the text) and can be set using the b / -.