Paul CLIMOS F 200, Оригинальная инструкция по эксплуатации

Страница: 47 / 68

47
Buttons
Navigation Temperature / Hysteresis/ inactive below
Select by touching the navigation buttons (red background of the
text) and confirm with Enter.
Buttons
+ / - Set the selected parameter with the b / - .
Buttons
Enter
Cancel / back Confirm by touching the Enter button. By touching the Cancel /
back button, exit the menu level.
Tab. 34:
Parameterization setting submenu summer ventilation without by-pass
The following switch conditions are for provided for the summer ventilation without bypass
Parameter Parameter description
T1: Temperature of intake air (t_int) at temperature sensor T1 of the device
T3: Temperature of extract air (t_ext) at temperature sensor T3 of the device
t_sum: Temperature threshold for activating the summer ventilation
t_int_min: Limit for intake air temperature
H_sum: Hysteresis of the temperature threshold for activating the summer ventilation
Function Switching conditions
ACTIVE, if: T1 < T3
& T1 > t_int_min & T3 > t_sum + H_sum
Tab. 35: Switching conditions for summer ventilation
3.6.1.5 Submenu Ground pipe diverter valve
In this menu, it is specified whether a flap of the geothermal heat exchanger is available.
Symbol Designation Explanation / actions
Button
Checkmark By touching the button Checkmark, an available flap of the
geothermal heat exchanger is released.
Button
Cancel / back By touching the Cancel / back button, exit the menu levels until the
start menu appears.
Tab. 36: Parameterization flap of the geothermal heat exchanger
3.6.1.6 Submenu Reset factory data
In the submenu Reset factory data, the device can be reset to factory data.
Symbol Designation Explanation / actions
Button
Checkmark By touching the button Checkmark, the plant is reset to factory
data.
Button
Cancel / back By touching the Cancel / back button, exit the menu levels until the
start menu appears.
Tab. 37: Reset factory data